Monday, March 31, 2008

Scanner Training - Day One

Today marked the first day of our 3D scanner training. Rob from Paperless Parts came down all the way from Nashua, NH fighting through the AM traffic to make it to our shop by 9 AM - a drive that took him 3 hours, so thanks go out to Rob for accommodating our schedule to make it here!

Once he arrived, we set up the last bit of software on the laptop that comes with the package, brought it and the scanner out to the vehicle prototyping lab and got right to work. First, we calibrated the scanner, then checked the scanner saturation levels to assure a quality scan. After scanning a few small parts, Dave and I went next door to Factory Five to get a Mustang 8.8 rear end used in the FFR kits so we could get an idea of what it will be like to scan larger, more complex assemblies.

Just as expected, scanning the rear axle is much faster than having to model the assembly by taking various measurements off of the axle, sitting down at the computer and drawing the parts, going back to the axle for more measurements etc. etc. It does take some time to get used to the scanner, and to capture enough of the finer details to later complete the model in the software package, but much easier than going through the measure, then draw process.

Here's a picture of me scanning the rear axle, which is instantly loaded into the computer. After our second day of training is complete, and the computer model has been finalized, I'll share some pictures of that process, but for now, this will have to do...sit tight!

4 comments:

Water Lion said...

Bạn đang đi tìm một nơi order hàng Nhật Bản. Bạn muốn tìm nơi ship hàng Nhật
? Nếu bạn vẫn chưa tìm ra nơi đó thì hãy đến với chúng tôi giaonhan247. Chúng tôi hiện nay là công ty chuyên cung cấp các dịch vụ vận chuyển hàng ở nước ngoài về Việt Nam và ngược lại. Tiêu biểu có thể kể đến như Dịch vụ vận chuyển gửi hàng từ Việt Nam đi Nhật, Dịch vụ vận chuyển gửi hàng từ Việt Nam đi Mỹ, Nhận order hàng mỹ... Và còn rất nhiều dịch vụ khác như mua hàng trên amazon để phục vụ bạn. Muốn mua hàng ở nước ngoài, chỉ cần đến với chúng tôi bạn sẽ không cần phải lo nghĩ nhiều nữa.

Finish said...

Good article!

___________________________
ufo3d.com

Quốc Lê Bảo said...

Good article!
ship hàng Mỹ
nhận ship hàng Mỹ
nhận ship hàng từ Mỹ
ship hàng từ Mỹ về việt nam
gửi hàng từ mỹ về việt nam
vận chuyển hàng từ mỹ về việt nam

Neil Jakson said...

This course provides a solid foundation for new recruits to complement on-the-job training. Using our continuously updated simulation system, participants can practice their x-ray screening and threat detection skills in the safety of the classroom. Course materials comply with EC 185/2010 and EC 300/2008 and are taught by experienced IATA instructors.
coursework Writing Service